Home
Contact us
Map
Main services
Circular No. 29/2011/TT-BGTVT dated April 15, 2011 of the Ministry of Transport amending and supplementing a number of articles of the Regulation on inspection of quality, technical safety, and enviro
28/07/2011
Share |

 

 

THE MINISTRY OF TRANSPORT

 

Circular No. 29/2011/TT-BGTVT of April 15, 2011, amending and supplementing a number of articles of the Regulation on inspection of quality, technical safety, and environmental protection of Imported motorcycles and mopeds and imported engines used for motorcycle and moped manufacture or assembly, promulgated together with the Minister of Transport's Decision No. 57/2007/QD-BGTVT of November 21, 2007, and the Regulation on inspection of quality, technical safety and environmental protection in motorcycle and moped manufacture and assembly, promulgated together with the Minister of Transport's Decision No. 58/2007/QD-BGTVT of November 21, 2007

 

Pursuant to the November 13, 2008 Road Traffic Law; Pursuant to the November 21, 2007 Product and Goods Quality Law; Pursuant to the Government's Decree No. 51/ 2008/ND-CP of April 22, 2008, defining the functions, tasks, powers and organizational structure of the Ministry of Transport;

 

The Minister of Transport stipulates as follows:

 

Article 1. To amend and supplement a number-of articles of the Regulation on inspection' of quality, technical safety and environmental protection of imported motorcycles and mopeds and imported engines used for motorcycle and moped manufacture or assembly promulgated together with the Minister of Transport's Decision No. 57/2007/QD-BGTVT of

November 21, 2007

 

1. To .amend Clause 1 of Article 3 as follows: "1. For motorcycles:

 

a/ A paper of registration for quality inspection of imported motorcycles (below referred to as inspection registration paper), made according to a form provided in Appendix IV to this Regulation;

 

b/ A copy of the import declaration containing the importer's certification; a

            copy of the commercial invoice or equivalent paper related to the goods value containing the importer’s certification;

 

 

c/ The manufacturer's documents introducing technical properties of imported motorcycles, showing major specifications on dimensions, weight, permissible number of passengers, maximum speed, transmission type, tire code and major technical specifications of the engine: maximum momentum, maximum capacity corresponding to the engine's revolving speed, cylinder diameter, stroke of piston, cylinder capacity, type of fuel and type of clutch; and documents on exhaust emissions according to current regulations;

 

            d/ The declaration on the motorcycle's technical specifications and properties (in case the document introducing technical properties contains

            insufficient technical specifications as required at Point c of this Clause), made according to a form provided in Appendix V to this Regulation." 2. To amend Clause 2 of Article 3 as follows:

 

"2. For engines:

 

            a/ A paper of registration for quality inspection of imported engines (below referred to as inspection registration paper), made according to a form

provided in Appendix IV to this Regulation;

 

b/ A copy of the import declaration containing the importer's certification; a

            copy of the commercial invoice or equivalent paper related to the goods value containing the importer's certification;

 

c/ The manufacturer's documents introducing technical properties of imported engines, showing major specifications on maximum momentum, maximum capacity corresponding to the engine's revolving speed, cylinder diameter, stroke of piston, cylinder capacity, type of fuel, type of clutch and gear box transmission ratio;

 

d/ The declaration on the engine's technical specifications and properties (in case the document introducing technical properties contains insufficient technical specifications as required at Point c of this Clause), made according to a form provided in Appendix VI to this Regulation." 3. To amend Article 6 as follows:

 

"Article 6. Order and mode of implementation

 

1. The importer makes a dossier of inspection as required and submit it directly to the quality inspection agency;

 

2. The quality inspection agency receives and checks the dossier and compares it with current regulations on imported motorcycles and engines. If the dossier is incomplete according to regulations, it shall guide the importer to supplement the dossier; if the dossier is complete according to regulations, within 1 working day, the quality inspection agency shall give certification in the inspection registration paper and reach agreement with

 

 

the importer on the time and venue of inspection;

 

3. The quality inspection agency conducts inspection. Within 5 (five) working days after the completion of inspection and the importer submits a complete dossier according to regulations, if the motorcycles or engines satisfy quality requirements, the quality inspection agency shall grant a certificate of quality, technical safety and environmental protection, made according to a relevant form provided in Appendix Ha or lib to this Regulation;

 

4. For motorcycles and engines not conformable with current standards and technical regulations, the quality inspection agency shall notify such to the importer for remedy. The remedy of the whole goods lot must be completed within 30 days after the date of receiving the notice. Past this time limit, if the goods lot has not yet been remedied, the quality inspection agency shall issue a notice of the non-conformity of imported motorcycles or engines with import quality standards, made according to a relevant form provided in Appendix IIIa or IIIb to this Regulation."

 

4. To add the following appendices:

 

a/ Appendix IV: Form of the paper of registration for quality inspection of imported motorcycles/engines;

 

b/ Appendix V. Form of the declaration on technical specifications and properties of motorcycles;

 

c/ Appendix VI: Form of the declaration on technical specifications and properties of engines.

 

            Article 2. To amend and supplement a number of articles of the Regulation on inspection of quality, technical safety and environmental protection in motorcycle and moped manufacture and assembly, promulgated together with the Minister of Transport's Decision No. 58/2007/QD-BGTVT of

November 21, 2007

 

            1. To amend Point d, Clause 1 of Article 4 as follows: "d/ A list of main components used for engine assembly (in case the

product is «n engine), made according to a form provided in Appendix V to

            this Regulation;"

 

2. To amend Point a, Clause 2 of Article 4 as follows: "a/ A paper of registration of technical specifications, enclosed with a design photo and a general drawing of the product and a sample of the registered goods label, made according to a form provided in Appendix VI to this Regulation;"

 

3. To amend Points d and e, Clause 2 of Article 4 as follows:

 

 

"d/ Report explaining the method of embossing chassis and engine numbers and their positions, made according to a form provided in Appendix VII to this Regulation;

 

e/A list of main components used for vehicle assembly, made according to a form provided in Appendix VIII to this Regulation;"

 

            4. To amend Point b, Clause 2 of Article 5 as follows: b/ Annual assessment shall be conducted on an annual basis;

            5. To add the following Article 5a below Clause 4 of Article 5: "Article 5a. Order and mode of implementation

 

1. The manufacturer makes an inspection registration dossier as required and submits it directly or by post to the quality inspection agency; 2. The duality inspection agency receives and checks the dossier; if the dossier is incomplete according to regulations, it shall guide the manufacture to complete it; if the dossier is complete according to regulations, it shall issue a slip of appointment for receiving the result of dossier inspection and reach agreement with the manufacturer on the time and venue of physical inspection":

 

3. The-quality inspection agency conducts physical Inspection at the manufacturer's establishment; if the quality inspection conditions are insufficient, it shall issue a reply stating the reason to the manufacturer; if the qualify inspection conditions are satisfactory, it shall grant a certificate of quality, technical safety and environmental protection according to regulations."

 

            6. To change the title of Article 8 into the following: "Article 8. Annual assessment and revocation of certificates of type

quality"

 

7. To amend Clause 1 of Article 8 as follows:

 

"1. Annually, the quality inspection agency shall re-assess quality inspection conditions specified at Point b, Clause 2, Article 5 of this Regulation.

 

For chassis, engines and vehicles, the quality inspection agency shall take random samples of products of the same type at the manufacturers' establishments, and test those samples at testing units against relevant standards and technical regulations."

 

8. To cancel Clause 2 of Article 8

 

9. To amend Clause 4 of Article 8 as follows:

 

"4. Quality certificates will be invalidated and revoked in the following

 

 

cases:

 

a/ Products no longer satisfy current regulations, standards or technical regulations or are changed compared to their registration dossiers or granted certificates;

 

b/ Results of assessment of product quality inspection conditions show that

            the manufacturer seriously violates relevant regulations on product quality inspection and issuance of ex-workshop cards;

 

c/ The manufacturer fails to recall according to regulations faulty products in the process of design or manufacture which are likely to harm users and adversely affect the environment."

 

10. To modify and add the following appendices:

 

            a/ To modify Appendix Ha: Form of the certificate of type quality for products being motorcycles and mopeds;

 

b/ To modify Appendix lib: Form of the certificate of type quality for products being motorcycle and moped components;

 

c/ To add Appendix V: Form of the list of main components used for engine assembly;

 

d/ To add Appendix VI: Form of the paper of registration of technical specifications;

 

e/ To add Appendix VII: Form of the explanation report on the method of embossing frame and engine numbers and their positions; f/ To add Appendix VIII: Form of the list of main components used for vehicle assembly.

 

            Article 3. Effect and implementation responsibility 1. This Circular takes effect 45 days after the date of its signing. 2. Quality certificates granted before the effective date of this Circular may

be used until the end of the validity duration stated therein.

            3. The Office Chief, the Chief Inspector, directors of departments, the general director of the Vietnam Road Administration, directors of administrations of the Ministry, directors of provincial-level Transport Departments, heads of related agencies and organizations and related individuals shall implement this Circular.

 

Minister of Transport

 

HO NGHIA DUNG

Tags: Vietnam lawyers, Vietnamese lawyers, Vietnam lawyers association, Vietnam attorneys, Vietnam laws, Vietnamese laws, Vietnam legislation, constitution Vietnam, company law Vietnam, environmental laws in Vietnam

www.lawfirm.vn

updating...
Older Documents
Online Support
Liên hệ bằng Yahoo! Messenger
If you need advice, please contact via Yahoo! Messenger to get online help.

Lawyer in Hanoi
Contact via Skype
You can use Skype to get online help
Skype Me™!
Search legal documents
Latest Documents
Advertising
Site Information

 
 
 

© Copyright: 2011 DRAGON LAW FIRM  - All rights reserved


Hotline: 1900. 599. 979

Mật ong nguyên chấtChuyên cung cấp sỉ và lẻ mật ong nguyên chất 100% tại TPHCM từ thiên nhiênDịch vụ điện hoa Hoa Tươi 360o với dịch vụ điện hoa chuyên nghiệp, giá hợp lý giúp bạn gởi đến người thân những bó hoa tươi đẹp nhấtShop hoa phong lan Hoa tươi 360o là shop hoa phong lan TPHCM chuyên cung cấp các loại hoa lan hồ điệp và địa lanHoa giỏ Hoa giỏ để bàn tạo cho không gian làm việc trở nên cực kỳ ấn tượng, được sử dụng trong các dịp như đám cưới, tặng sếp, sinh nhật....Hoa bó Hoa tươi 360o giúp bạn gởi đến bạn bè, người thân hoa bó chúc mừng sinh nhật, tốt nghiệp, hoa tặng sếp nam giá hợp lý, giao hoa miễn phí TP. HCMhoa chúc mừng Hoa tươi 360o chuyên điện hoa chúc mừng khai trương: kệ hoa khai trương, giỏ hoa khai trương... với giá hợp lý, giao hoa miễn phí trong TPHCMHoa chia buồn Hoa tươi 360o chuyên điện hoa chia buồn ở TPHCM với giá cả hợp lý, giao hoa miễn phí ở TPHCMHoa chúc mừng sự kiện Hoa chúc mừng sinh nhật, hoa chúc mừng sự kiện tặng bạn bè hoặc người thân những dịp trọng đại, giao hoa miễn phí nội thành TPHCMShop hoa cưới Hoa cưới đẹp giúp đám cưới của bạn thêm ý nghĩa. Gọi 1900 545 587 để được shop hoa cưới - Hoa tươi 360o tư vấn, giao hoa cưới miễn phí ở Bình Thạnh và tại TPHCMhoa tươi Shop Hoa tươi 360o với dịch vụ hoa tươi giúp bạn gởi đến người thân những bó hoa tươi đẹp - giá hợp lý, giao hoa miễn phí tại TPHCMĐặt quần áo đá banh Đặt quần áo bóng đá - Đặt quần áo đá banh ở TPHCM với chất lượng tốt, giá ưu đãi. Gọi 0903 009 041 để Đặt quần áo bóng đá - Đặt quần áo đá banhGiày Futsal PAN Thái LONI chuyên cung cấp các loại giày Futsal PAN Thái Lan giá rẻ trên toàn quốc. Gọi 0903 009 041 gặp MS. Nhi để đặt giày Futsal Pan Thái  giá rẻgiày đá banh cỏ tự nhiên LONI Sport chuyên cung cấp các loại giày đá banh cỏ tự nhiên giá rẻ với nhiêu mẫu mã đẹpGiày đá banh cỏ nhân tạo LONI SPORT kinh doanh sỉ và lẻ giày bóng đá, giày đá banh cỏ nhân tạo, giày futsal Pan Thái Lan với giá cạnh tranh kèm quà tặng hấp dẫngiày đá banh LONI SPORT kinh doanh sỉ và lẻ giày đá banh, giày bóng đá cỏ nhân tạo Fake1, giày futsal Pan Thái Lan với giá cạnh tranh kèm quà tặng hấp dẫnáo bóng đá - áo đá banh LONI Sport chuyên thiết kế và sản xuất quần áo đá banh, áo bóng đá ở TPHCM. Quý khách đặt áo đá banh vui lòng liên hệ: 0983 031 509 - 0903 009 041Shop quần áo đá banh - Shop bán đồ thể thao Shop bán đồ thể thao Loni Sport chuyên bán quần áo đá banh, phụ kiện thể thao như: giày đá banh, túi xách, vớ ...Gọi 0983 031 509 - 0903 009 041DỰ ÁN CĂN HỘ NEWTON RESIDENCE DỰ ÁN CĂN HỘ NEWTON RESIDENCE sẽ chính thức mở bán vào 30/2/2016. LH mua CĂN HỘ NEWTON RESIDENCE 0903414547-0933333188Thay mặt kính Ipad Thay mặt kính Ipad giá rẻ nhất TP. HCM, lấy liền có bảo hànhThay mặt kính Samsung Thay mặt kính Samsung giá rẻ nhất TP. HCM, lấy liền có bảo hànhthay mat kinh Iphone Thay mặt kính Iphone giá rẻ nhất TP. HCM, lấy liền có bảo hànhThay mặt kính Iphone 6S Thay mặt kính Iphone 6S giá rẻ nhất TP. HCM, đặc biệt chờ lấy liền. Nhận thay mắt kính Iphone 6S cho các cửa hàng Cọc khoan nhồi Nền Móng Đất Phương Nam chuyên thi công cọc khoan nhồi mini với phương pháp và thiết bị hiện đại, đội ngũ nhân viên chuyên nghiệp. Gọi ngay 0919 49 8080Phụ kiện nhà bếp Inox 304 Phụ kiện nhà bếp bằng Inox 304 do Hòa Bình Glass sản xuất và phân phối giúp cho các bà nội trợ nhanh chóng giải quyết vấn đề dầu mỡ vì dễ lau chùi, tiện lợi và nhanh chóngGương soi phòng tắm Gương soi phòng tắm do Hòa Bình Glass sản xuất từ nguyên liệu kính Guardian của Mỹ với nhiều mẫu mã phong phúPhụ kiện phòng tắm Hobig chuyên sản xuất và phân phối phụ kiện phòng tắm, liên hệ để có bảng giá sỉ phụ kiện phòng tắm phù hợp cho mọi nhàPhụ kiện nhà bếp Hòa Bình Glass chuyển sản xuất và phân phối phụ kiện nhà bếp. Liên hệ để có bảng giá phụ kiện nhà bếp cho đại lýthay mặt kính Iphone 6s Plus thay mặt kính Iphone 6s Plus giá rẻ nhất TP. HCM, đặc biệt chờ lấy liền và có bảo hành đầy đủ

Thám tử Văn phòng luật sư |   Luật sư bào chữaVietnam lawfirm |  Quảng cáo trực tuyến |  Thiết bị camera |  đại lý vé máy bay |  Thám tử hà nội | dịch vụ thám tử | Thám tử tại hà nội | thám tử sài gòn | thuê thám tử tại sài gòn | Thám tử tại sài gòn | Thám tử hải phòng | Thám tử | Thám tử tư |
quảng cáo facebook